Numerical investigation of mass flow rate effects on multiplicity of detonation waves within a H2/Air rotating detonation combustor

This paper presents results from numerical simulations of a non-premixed hydrogen-air rotating detonation combustor with radial injection. The fuel and air mass flow rate are varied in order to hold a unity global equivalence ratio. The calculations show that multiple detonation waves co-exist when the mass flow rate is increased. Conditional statistics of the detonation structure and combustion processes suggest similarities across co-existing waves. Quantification of the injection response to the rotation of a detonation indicates that at higher flow rate the refill time is short enough to allow for a quick and well mixed composition prior to the new front passage. Details of the combustion characteristics are analyzed. The results elucidate the correlation between initial injection conditions and detonation multiplicity on the overall physics within the combustor.     

Flash Lamps as Ignition and Initiation Sources of the VS-2 Pyrotechnic Composition

In the present work it is found that the pyrotechnic composition VS-2 can be initiated with flash lamps IFC-500 and EVIS. VS-2 pyrotechnic composition contains 90% of mercury（Ⅱ） 5-hydrazinotetrazolate perchlorate and 10% of optically transparent copolymer of 2-methyl-5-vinyltetrazole and methacrylic acid （PVMT）. We have found that the flash lamps make it possible to initiate combustion of VS-2 composition with its transition to detonation both in cylindrical charges placed in brass caps of 5 mm diameter and 2 mm high， and film charges with 10 mm×80 mm in size and surface weights of 60 mg·cm^-2 and 90 mg·cm^-2， showing ignition delay times 10 μs and 3 μs， respectively. We also measured detonation velocities for VS-2 composition film charges， which were 4375-4505 m·s^-1 （of the charge being surface mass 60 mg·cm^-2） and 4221-4281 m·s^-1 （of the charge being surface mass 90 mg·cm^-2） and their blasting action on the aluminum plate. The depths of the normal shock wave imprints at the charge-barrier interface were 0.6-0.7 mm （for surface mass of the film charges 60 mg·cm^-2） and 1.2-1.3 mm （for surface mass of the film charges 90 mg·cm^-2）.     

Mixing enhancement mechanism of combined H2–Water jets in supersonic crossflows in a combustor with an expanded section

To obtain the mixing enhancement mechanism of H₂–Water combined jets in supersonic crossflows in a combustor with expanded section for rotating detonation ramjet, the flow field shape and spray structure were studied by experimental and numerical methods. The Eulerian–Lagrangian method was used to investigate the diffusion mechanism and H₂–Water interaction law of combined jets with different sequences. At the same time, high-speed photography and the schlieren technique were used to capture the flow field. The effects of jet pressure drop, orifice diameter, orifice spacing, incoming Mach number, and other parameters on the penetration depth of water jets were studied. The results of experiment and simulation show that using H₂–Water combined jets, the penetration depth of the jet spray can be greatly increased and the jet mixing effect can be significantly improved, which will contribute to the engine's ignition and stable combustion. In the case of pre-water/post-H₂, the penetration depth of the hydrogen jet is greater. In the case of pre-H₂/post-water, the hydrogen jet raises the water spray mainly by protecting the integrity of the water column.     

Research on H2/Air rotating detonation in the hollow chamber with double injection

In order to investigate the relationship between high frequency tangential instability and continuous rotating detonation, series of H₂/Air rotating detonations are experimentally achieved in the hollow chamber with double injection sections. In the center part, gaseous H₂ and air injected by co-axial injector. Near the outer wall, the same propellants are injected in the form of slit-orifice collision. By keeping the total air mass flow rate approximately constant, varying the mixture of the inner and outer injection, series experiments are conducted in the test model with or without Laval nozzle. The results verify the possibility of rotating detonation in the hollow chamber with co-axial injector. To clarify the relationship between continuous rotating detonation and high frequency tangential combustion instability, the intrinsic frequencies of the test model are captured to be compared with propagation frequencies of detonation waves. The results show that they are close to each other when enough propellant assembled near the outer wall. In the combustor, the flame direction in constant pressure mode can change itself into rotating direction spontaneously. The results indicate that rotating detonation is an implication to high frequency tangential instability.     

Detonation propagation through a nonuniform layer of hydrogen-oxygen in a narrow channel

Experiments were carried out to study detonation propagation through a nonuniform layer of stoichiometric hydrogen-oxygen in a narrow channel. Premixed stoichiometric hydrogen-oxygen was injected through a series of 1.3 mm diameter, 4.8 mm spaced holes into a 7 mm wide optically accessible channel initially filled with an inert gas. A Chapman-Jouguet detonation wave was transmitted into the test section from a pre-detonator of equal height. The height of the layer was varied by changing the time of hydrogen-oxygen injection relative to the arrival-time of the detonation wave. Schlieren photography was used to record the progression of the detonation wave. Soot foils mounted to the back window, were used to record the detonation cellular structure and visualization of the soot incandescence provided tracking of the reaction zone. With the channel initially filled with argon, detonation propagation was only possible when the layer height accommodated at least 8–11 detonation cells. Detonation propagation was not possible when the channel initially contained nitrogen, or carbon dioxide, indicating strong mixing with the injected premixed hydrogen-oxygen. Numerical simulations confirmed the strong mixing between the injected premixed hydrogen-oxygen with the prefilled inert gas. The simplified mixing condition, i.e., injection of premixed hydrogen-oxygen, provides a unique data set for numerical code validation and verification for a linear RDE geometry.     

等离子喷涂与脉冲等离子爆炸复合涂层的氧化组织分析

采用等离子喷涂在镍基高温合金GH4049表面制备了CoNiCrAlY涂层,随后对涂层进行了脉冲等离子爆炸和真空预氧化处理,并对涂层进行了1050℃保温10 h和50 h的恒温静态氧化实验。结果表明:经过脉冲等离子爆炸处理后的涂层表面形貌更加平坦,脉冲等离子爆炸处理使得涂层表面的片层结构转变为致密结构,减少了氧气渗入涂层的通道,有效延缓了涂层的氧化过程,且没有改变涂层的化学成分;在1050℃空气中氧化50 h后,涂层的物相组成与未氧化处理的基本一致。     

Structural properties of nanocomposites based on resole-type phenol-formaldehyde oligomers and detonation nanodiamonds

Using the methods of infrared spectroscopy (IRS) and X-ray photoelectron spectroscopy (XPS), it was shown that short-term high-energy machining of detonation nanodiamonds (DND) leads to structural changes in the crystal structure and functional composition of the surface layer on particles. The possibility of spontaneous formation for stable colloidal systems with a narrow size distribution of mechanically activated DND in phenol-formaldehyde oligomers (PFO) was established. By molecular spectroscopy it was revealed that π → π* interactions of the aromatic rings of PFO are caused by orientational phenomena as a result of hydrogen bonds between an activated DND surface and functional groups of PFO. The effect of DND concentration on the curing reaction parameters ofpsgr the phenol-formaldehyde oligomer was determined by differential scanning calorimetry (DSC). The concentration effect of mechanically activated nanodiamonds on the physical and mechanical characteristics of a composite material based on phenol-formaldehyde binder and polyamide paper (Nomex) was studied. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48582.     

Numerical investigation of pre-detonator in rotating detonation engine

Pre-detonators are commonly used in rotating detonation engine (RDE) experiments. Current experimental studies focus on the performance of pre-detonator while ignoring the influence of pre-detonator on the flow field. In numerical simulations one-dimensional detonation wave is usually used to ignite the fresh gas in RDE. This is a simplification of the pre-detonator used in practical hotfire tests. But the coupling between the pre-detonator and the combustor is ignored. The aim of the present study is to study the influence of pre-detonator on the flow field in the RDE. A model of RDE with a pre-detonator is built, in which three-dimensional numerical simulations fueled with hydrogen/air is performed. The influence of pre-detonator on the combustor in different stages is studied. After initiation, detonation wave from the pre-detonator forms two counter-rotating detonation waves. The tangential installation of pre-detonator fails in directional initiation of detonation wave. The coupling effect is shown as the reflection and expulsion of shock wave. Detonation wave or oblique shock wave in the combustion chamber enters the pre-detonator and turns into shock wave before colliding with the end and re-entering the combustion chamber. Under some circumstances, the reflected shock wave will initiate a detonation wave and affect the wave structure in the combustion chamber. In the stable stage, the reflected shock wave has no effect on the flow field. However, periodic collision of reflected shock wave with detonation wave at the junction causes ablation in long-time experiments. Increasing the axial distance between pre-detonator and injection wall is expected to be a solution for the ablation problem.     

Effects of injection parameters on propagation patterns of hydrogen-fueled rotating detonation waves

Two-dimensional rotating detonation waves (RDWs) with separate injections of hydrogen and air are simulated using the Navier–Stokes equations together with a detailed chemical mechanism. The effects of injection stagnation temperature and slot width on the detonation propagation patterns are investigated. Results find that extremely high temperatures can lead to a chaotic mode in which detonation waves are generated and extinguished randomly. Increasing the slot width can reduce the number of detonation waves and finally trigger detonation quenching at a low injection stagnation temperature. But increasing the slot width can change the RDW propagation pattern from a chaotic to a stable mode under high injection temperature. Furthermore, the kinetic parameter τ (representing the chemical reactivity of the mixture) and the kinematic parameter α (representing the mixing efficiency of hydrogen and oxygen) are introduced to distinguish the RDW propagation patterns.